Lens | - Focal length: 2.8 - 12 mm
- Focal depth: 10 – 1,500 mm (Wide-Tele)
- Aperture: F1.6 – 2.7 (Wide - Tele)
- Sensor: 1/2.8” Progressive Scan CMOS
- Focus: auto, semi-auto, and manual
- Iris control: auto and manual
|
Viewing Angle | - Horizontal: 115 - 33.8° (Wide – Tele)
|
Zoom | - Combined zoom factor: 64x
- Optical: 4x
- Digital: 16x
- Speed: 1s
|
Pan/Tilt | - Pan: endless 360°
- Tilt: -10 - 90° (auto flip)
- Pan speed: (manual) 0.1 - 160°/s, (preset) 160°/s
- Tilt speed: (manual) 0.1 - 120°/s, (preset) 120°/s
- Number of presets: 256
- Patrol: 8 patrols, up to 32 presets per patrol
- Scheduled PTZ: create detailed weekly schedule with the following activity options: auto scan, frame scan, random scan, patrol, pattern, preset, panorama scan, tilt scan, dome reboot, and dome adjust
|
Minimum Illumination | - IR off: color: 0.05 lux, B/W: 0.01 lux
- IR on: 0 lux
- 30 m IR illumination distance
- Smart IR: automatically adjusts wide angle and narrow focus IR to match zoom ratio
|
Video | - Digital Wide Dynamic Range (D-WDR)
- Backlight Compensation (BLC)
- 3D Digital Noise Reduction (DNR)
- Shutter speed: 1 - 1/10,000s
- H.264 resolution: 1920 x 1080 up to 30 fps
- MJPEG resolution: 704 x 480 up to 30 fps
|
Audio | - 2-way audio supported (mic and speaker not included)
- External microphone line in / speaker line out
|
I/O | - External input/output for alarm installation
|
Micro SD | - Up to 64 GB micro SD card support
|
Hardware Standards | - IEEE 802.1X
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3at
|
Device Interface | - 10/100 Mbps PoE+ port
- Power connector (for non-PoE installation)
- Audio wires (in/out/ground)
- Micro SD card slot (64 GB max.)
- Alarm I/O wires
- Suspension cable holds the camera during installation
|
Input / Output | - Alarm input: 1 ( 0 – 5v DC)
- Alarm output: 1 relay output
- Audio input: 1 audio line in, 2 – 2.4 V; impedance: 1000 Ω, ± 10%
- Audio output: 1 output line out, impedance: 600 Ω
|
Housing | - Weather rating: IP66
- TVS 4,000 V lightning, surge, and voltage transient protection
- Built-in automatic heater for cold weather conditions
|
Network Protocol | - IPv4, IPv6, UDP, TCP, IGMP, ICMP, ONVIF v2.2
- DHCP, NTP, DNS, DDNS, SMTP, FTP, SNMP (v1, v2c, v3)
- CIFS/SMB, NFS
- HTTP, HTTPS
- PPPoE
- UPnP, RTSP, RTP
|
Operating Temperature | - -30 - 65 °C (-22 - 149 °F)
|
Operating Humidity | |
Certifications | |
Dimensions | - 155 x 155 x 235 mm (6.1 x 6.1 x 9. in.)
|
Weight | |
Power (Power brick not included) | - Input: PoE+ (IEEE 802.3at)
- Consumption: 20 /14 Watts max. (IR and heater on/off)
|
Required Mounting Accessories (not included) | - Ceiling mount: TV-HC400
- Pole mount: TV-HP400
- Wall mount: TV-HW400
- Corner mount: TV-HN400
|
Management Interface | - Multi-language support: English, French, German, Russian, and Spanish
- IP address filter
- QoS traffic prioritization
- Time, date, and text overlay
- Image settings: brightness, contrast, saturation, limit gain, sharpness, focus mode, minimum focus, exposure mode, smart IR, video standard, day/night switch, sensitivity, mirror, slow shutter, D-WDR, lens initialization, BLC, white balance, digital noise reduction, noise reduction level, Defog mode, zoom limit, HLC
- D-WDR enhances video quality in high contrast daytime lighting
- 3D DNR Digital Noise Reduction enhances night vision quality
- Scheduled recording: continuous and motion detection
- Video storage: to computer, NAS, CIFS/SMB share, NFS, Micro SD card, FTP server, or through software
- Motion detection fields: define custom motion detection areas, motion sensitivity, and dynamic motion analysis
- Smart privacy masks: custom privacy masks are fixed to an area of interest as the camera pans and tilts
- Tamper detection: email notification if the viewing field is suddenly obscured
- Browser video playback: advanced playback functionality with visual timeline displaying detected motion and scheduled recordings
- Alert messages: storage full, storage error, and illegal login
- Snapshot: real time snapshot, motion detection with schedule, tamper detection with schedule
- Supported dynamic DNS services: dyn.com and No-IP.org
- Management Setting: maximum 32 user accounts
- Supports remote management
- Storage logs: Alarm, Exception, Operation, and others
- Compatibility: Internet Explorer® 9.0 or higher, Safari® 5.0 or higher
|
TRENDnetVIEW Pro Software | - Supports up to 32 TRENDnet cameras
- Multiple language support
- Set recording options (motion detection, schedule, event trigger)
- Search and playback
- Custom viewing modes and options
- Compatibility: Windows® 10, 8.1, 8, 7, Vista, XP, Windows Server® 2003, 2008
|
TRENDnetVIEW App | - Free iOS and Android™ app
- View your camera on your mobile device
- Take snapshots
- Pan/Tilt/Zoom
|
Warranty | |