Hardened IP30 rated SFP to Gigabit PoE+ converter
SFP port accommodates Multi or Single Mode fiber
Up to 40 km fiber networking distances with the TI-MGBS40 SFP module
Provides up to 30W for PoE and PoE+ compliant devices
Includes DIN-rail and wall mounts
Wide operating temperature range -40 to 75 °C (-40 to 167 °F)
Dual redundant power inputs with overload current protection
 
SPEC
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Device Interface
1 x Gigabit PoE+ port
1 x 100/1000Mbps SFP slot
4-pin removable terminal block
LED indicators
DIP Switch
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)
Performance
Data RAM Buffer: 1MB
Jumbo Frame: 9KB
Hardened components rated for extreme temperatures
Auto-Negotiation
Auto store and forward architecture
Automatic address learning and address aging
Power
Input: 48 - 56 V DC
Compatible power supply: TI-S12048 (sold separately)
Consumption: 2 watts (without PoE) with 48VDC input
PoE
Mode A (V+ 1, 2; V- 3,6)
Budget: 30 watts
Consumption: Max. 36 watts with 56VDC input
Terminal Block
Power and relay inputs, 4 pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5Nm / 0.56 Nm
Wire strip length: 7-8mm
DIP Switch
1: reserved, no function
2: set SFP speed to 100Mbps or 1000Mbps
MTBF
500,000 hours
Housing
IP30 aluminum case
DIN-rail mount
Wall mount
Grounding point
Operating Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating Humidity
Max. 95 % non-condensing
Dimensions
104 x 81 x 32 mm (4 x 3.2 x 1.2 in.)
Weight
154 g (5.4 oz.)
Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
EN60950-1 (LVD)
Warranty
3 years