Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter
SFP port accommodates Multi or Single Mode fiber
Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module
Includes DIN-rail and wall mounts
Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
Dual redundant power inputs with overload current protection
Powers supply sold separately (model TI-M6024)
 
SPEC
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
Device Interface
1 x Gigabit port
1 x Gigabit SFP slot
4-pin removable terminal block
LED indicators
DIP Switch
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Performance
Data RAM Buffer: 1024 KB
Jumbo Frame: 9 KB
Special Features
Hardened components rated for extreme temperatures
Dual redundant power inputs
Auto-Negotiation
Auto store and forward architecture
Automatic address learning and address aging
ESD 8 KV and Surge 6 KV protection
Power
Input: 12 - 56 V DC or 18 - 36 V AC
Compatible power supply: TI-M6024 (sold separately)
Consumption: Max. 3 Watts
Terminal Block
Redundant power inputs, 4 pin
Wire range: 0.34 mm^2 to 2.5 mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
Wire strip length: 7-8 mm
DIP Switch
1: Set SFP speed to 100 Mbps or 1000 Mbps
2: Enable or disable auto-negotiation on SFP port
3: Set to switch or pass through mode
4: Turns LFP (Link Fault Pass Through) on or off
MTBF
510,304 hours
Housing
IP30 metal case
DIN-rail mount
Wall mount
Grounding point
8 KV ESD protection
6 KV surge protection
Operating Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating Humidity
Max. 95 % non-condensing
Dimensions
113 x 82 x 31 mm (4.4 x 3.2 x 1.2 in.)
Weight
152 g (5.4 oz.)
Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
Warranty
3 year limited